Tools with Morse Taper
RITTER^® is the reliable supplier for

• Tenons with morse taper shank for chucks – DIN 238,
  entirely hardened and ground,
  available sizes: MK 1 B 10 bis MK 5 B 24
  
  
• Tenons with cylinder shank for chucks,
  entirely hardened and ground,
  inserts for chuck: B 6 bis B 18
  
  
• Reduction sleeves with hexagon pick-up
  for hand gun drill and standing drill machines,
  entirely hardened, cone inside and outside ground
  available sizes: MK 1 + MK 2
  
  
• Reduction sleeves for tools with morse taper shanks – DIN 2185,
  type G: entirely hardened, cone inside and outside ground
  type W: tang hardened, cone inside and outside ground
  type W: tang hardened, cone inside and outside ground
  available sizes: MK 1 x 0 bis MK 6 x 1
  
  
• Extension sockets for tools with morse taper shanks – DIN 2187
  type G: entirely hardened, cone inside and outside ground ,
  available sizes: MK 1 x 1 bis MK 6 x 5
  
  
• Lathe centres – DIN 806,
  carbon steel, entirely hardened and ground,
  nose angle 60°
  available sizes: MK 1 bis MK 6
  
  
• Lathe centres with carbide tipped insert – DIN 806,
  carbon steel, entirely hardened and ground,
  nose angle 60°
  form: E
  available sizes: MK 1 bis MK 6
  
  
• Semi lathe centres with carbide tipped insert – DIN 806,
  carbon steel, entirely hardened and ground,
  nose angle 60°
  form: E
  available sizes: MK 1 bis MK 5
  
  
• Rotor lathe live centre – company standard,
  carbon steel, entirely hardened and ground,
  nose angle 60°
  available sizes: MK 1 bis MK 5
  
  
• Drill drifts for morse taper DIN 228/DIN 317, available sizes: MK 0 bis 5/6
  
  
• Drill drifts with semi-automatically lever-arm for morse taper DIN 228, available sizes: MK 1 bis 6